Order On-line Tracking
|IP Rating:||IP66||Color Temperature:||2800k-6500k||LED type:||LUMILEDS Simulation, Bridgelux|
|Lamp luminous flux(lm):||16800||Body material:||Aluminum Alloy||Working lifetime(Hour):||80000|
|PF:||＞0.95||Input voltage(V):||160～400V,AC||CRI (Ra>):||＞80|
The world leading AC directly drive technology
We possess the world leading AC directly drive technology and globally unique three-phase power directly drive patented technology which won the award of the 2014 Geneva International Exhibition of Inventions.
As the leader of advanced lighting technology in China, we will guide the new trend of no driver LED in the world.
Independent researched and developmental core chips
TF11 is a chip which is specially designed for the output of voltage change of the AC electric supply in LED lighting. It can adjust the quantity of loaded LED to realize the efficiency and power factor LED driving solution.
G13 is the Integrated circuit which is special for the control of over current and over voltage. According to the change of voltage, G13 could ensure the stability of LED, improve the reliability and durability of LED.
The TF11&G13 AC directly drive integrated circuit totally replaces the traditional LED driver, it realizes a reliable and high efficiency LED AC drive system.
Perfectly solves the biggest disadvantage of LED
The traditional drivers of LED are easy to damage, which becomes the biggest technical defect which decreases the service life of LED. At the same time, the high manufacturing cost is also the main factor which increases the cost of LED.
The no driver design of LED radically reduces the damage rate of LED, greatly improves the reliability of lightings.
Super long service life, constant stability
Our LED adopts AC directly drive power solution ,it discards the external LED power driver which seriously affects the service life of LED light. So the service life and stability of LED were greatly improved that are more than 10,000 hours (more than 8 years), twice as long as that of general street lights. Our company could provide the longest warranty of LED street lights in the market.
Remove the transformer, MOSDET, electrolytic capacitor and other components which restrict the life of the driver. So the service life of AC directly drive circuit can reach semi-permanent state that surpasses the LED luminous source. At the same time, the volume of AC chipset is much smaller than traditional driver.
Have over current, over voltage, reverse connection protections, which ensures the service life and stability of products.
The creative three-phase power AC directly drive technology ensures that the street lights could access the AC160—380V electric supply directly. This could reduce the line reconstruction of the traditional electric transmission line, it will save a large cost in the street light projects.
The highest luminous efficacy, low luminous attenuation
Choose high quality luminous resources that the light efficacy is more than 170LM/W.
The luminous efficacy of our street lights is more than 50% comparing with general street lights.
We provide the most energy-efficient street lights in the world to our clients.
The LED chips are encapsulated through multicrystal method so that the rate of dead lamp declines to a lower level.
Particular optical system
Utilizing the ZAG lens technology developed by USTC, the gap between the lens of light distribution and luminous source was filled by the colloid that ensure there is no air in the gap. This technology could realize the transmittance without light loss. Comparing with general products, the light efficacy of our LED is increased by 7%, the transmissivity reaches up to 99.8%.
According to the statistical data of LED errors, the percentage of the faults caused by circuit structure is 20%.
The percent of luminous source fault is 10%,
The percentage of the faults caused by driving power is 70%.
Thus it can be seen that the LED driver is the most important factor to decide the quality of LED lights.
Precision production, modularized design
Modularized design (encapsulated by 30-45W high luminous efficiency module).The design needn’t the maintenance by tools, the replacement is easy like replacing a bulb. There is a stepless dimming interface on the module which is available for the smart lighting service.
Brand of light source
Number of LED
Angle of LED
LED Luminous Flux (Tj=60℃)
<3% Per year
CRI(color rendering index)
Level of Protection
Light transmittance of lens
$125.00 / pc
$116.00 / pc
$445.50 / set
$235.00 / unit