Order On-line Tracking
|Color Temperature:||Pure White||Lamp luminous flux(lm):||90/W||Body material:||Aluminum|
|Working Temperature(℃):||-20-+50||PF:||＞0.9||Input voltage(V):||100-277|
|CRI (Ra>):||＞80||Warranty:||three years|
Low Frequency Induction Lamp
Rotatable linear shape
9W/18W 85V-265V Warm WhiteMicrowave radar sensor LED Induction Tube
Aluminm+plastic or glass
Orchid-led's intelligence radar microwave sensor LED Tube lamp Uses microwave Doppler principle, cleverly put microwave sensors miniatures in LED induction tube, when no moving objects in the induction zone, LED induction T8 in a dormant state, the lamp in the low brightness of 3 W (optional) state, not only satisfy the security requirements of lighting, and maximize the play of the advantages of LED lighting (according to the previous experience the parking lot, 24 hours of electricity can save about 85-90%).When a vehicle passes, LED microwave induction lamp low brightness in 0.2 seconds is waken up quickly reaching the bright lighting, power is 18W, completely replace the 60W fluorescent light,convenient car parking.The car or human activities in the induction region, LED Induction tube has remained high brightness, when the car or human leave the sensing area after 30 seconds,it will be changed into the automatic low brightness state intelligent LED lamp, the power is only 3W (optional).
1. PC+Aluminum body design ensures both safety and stability.
2. Prominent thermal management guarantees long life span.
3. Instant started without delay, no flicker, no noise.
4. No IR & UV radiation, mercury-free, environment friendly.
5. Single-ended solution/double-ended solution.
6. Compatible with ballast, easy to instal and direct replace traditional tube without rewiring.
7. High quality Radar/Microwave sensor with 3years Limited warranty.
8. Standby brightness could be customerized,10%,30% or off,default brightness:10%
9. Microwave Sensor with trigger angle 180°,trigger distance 5-8M
10.Rapid response Can be within 0.2 seconds
11.Not affected by environment, more stable performance
12. Save 70% more power than ordinary LED tubes,really energy saving
|Power consumption||9 W ||18W ± 1W|
|LED type||SMD 2835||SMD 2835|
|Luminous Flux||>850 lm||>1650 lm|
|Color rendering index||>80||>80|
|Size||600mm* Ø26mm||1200mm Ø26mm|
|Cover||Milky \ Clear||Milky \ Clear |
|Service Life||35, 000hrs||35, 000hrs|
1, High efficiency and energy saving at the same brightness, energy- saving LED lights 1000 hour 1 kWh of electricity consumption, ordinaryincandescent lamps 17-hour 1 kWh of electricity consumption, common energy-saving lamp 100 hour 1 kWh of electricity consumption.
2, super long life LED lamp use life of up to tens of thousands of hours,ordinary incandescent lamp service life more than 1000 hours.
3 health no ultraviolet and infrared light, light, no radiation, no pollution.General energy-saving lamp and incandescent light in the ultraviolet andinfrared.
4, Green does not contain harmful elements such as mercury and lead, havebenefited from recovery and utilization and does not produce electromagneticinterference.
5, protect eyesight using a DC power supply-driven, no Flash, general lightingis AC drive, strobe inevitably bad for the eyes for a long time.
6, high efficiency heating of small, 90% of electrical power into visible light, incandescent only 20% electric energy translated into visible light and80% of electrical energy into heat energy for limited resources is a greatwaste.
7, safety factor required for high voltage, low current, low heat, no securityrisks, which can be used in mines and other dangerous places.
8, IntelliSense: there is no sound (clap, Stomp, etc) without disturbing, whensomeone enters the detection range of microwave radar sensor dimmer lamp, LEDmicrowave radar sensor module
Wave detector lights, tube light 18W; when people leave the detection range,the microwave sensor dimmer lamp keep 3W brightness (also usually does notlight, to full brightness after induction)
9, intelligent time delay: switch is detected automatically after eachactivity of the human body to postponed a period (30s or so) and with humanactivity, an extension of time for the last time as the starting point thenext time, delay time can be adjusted.
100% of the lamps will be tested and keep lighting for 24 hours to test its quality reliability,and we will also test its temperature after 24 hours’lighting.Then after it is cool we again test 100% of the lamps to see if it still work well.Each lamp should pass all these QC procedures before shipping to customer.
$1.54 / pc
$7.44 / pc
$16.50 / pc
$5.47 / pc